George H. Atherton Papers, 1937-1979
Predominant Dates: 1970-1979
The George H. Atherton Papers consist of materials created or assembled by Atherton in his work as a forest products researcher and teacher. Atherton was a research engineer with the Oregon Forest Products Laboratory from 1950 to 1961, when he became a Forest Products professor at Oregon State University.
ID: MSS Atherton
Extent: 1.8 cubic feet
Statement on Access: Collection is open for research.
Statement on Description: Evaluations and grades of student papers have been redacted.
Preferred Citation: George H. Atherton Papers (MSS Atherton), Oregon State University Special Collections and Archives Research Center, Corvallis, Oregon.
Acquisition Note:
The papers were transferred by the Forest Products Department to the Archives in 1999.
Container List
- Series 1: Student Reports, 1970-1979 Add to Shelf
- Contains student project reports from 1970-1979 from the Department of Forest Products at Oregon State University taught by George Atherton. Series is arranged alphabetically by author names and contains a bibliography and index for class reports.
- Box-Folder 1.1: Bibliography – Student Reports and Index through 1979, 1979 Add to Shelf
- Note: Cross-reference index for class reports.
- Box-Folder 1.2: Mark R. Arslan. An Evaluation of the Relationship between Torsional Modules of Rigidity and Modulus of Rupture in Bending for Douglas-Fir Dimension Lumber, 1978 Add to Shelf
- Box-Folder 1.3: Jon C. Atherton. Effect of Species, Load and Load Cycling on Slip in Nailed Wood Joints, 1979 Add to Shelf
- Box-Folder 1.4: Student Projects: B, 1970-1979 Add to Shelf
- Item 1: Michael J. Bauman. Evaluation of Euler’s Formula for Predicting Critical Buckling Loads in Wood Columns, 1978 Add to Shelf
- Item 2: Kurt Barats. Direct Withdrawal Resistance of Screws in Medium Density Fiberboard, 1978 Add to Shelf
- Item 3: Jack W. Berka. The Effect of the Span-Depth Ratio on the Modulus of Elasticity and Modulus of Rigidity for Douglas-fir Box Beams, 1976 Add to Shelf
- Item 4: Bruce W. Bevard. Study of Density Variation in Hardboard Using X-Radiation, 1970 Add to Shelf
- Item 5: Philip R. Biencourt. Effect of Size and Location of Knots on the Bending Properties of Douglas-fir Studs, 1979 Add to Shelf
- Item 6: Wayne E. Borgersen. The Effect of Time on Interlayer Slip of Plywood by Two-by Four and Fiberboard to Two-by-Four Nailed Joints, 1976 Add to Shelf
- Item 7: Stephen D. Browning. Prediction of Strength and Stiffness of a Glued Laminated Beam from Properties of Cores Taken From the Laminations of the Beam, 1975 Add to Shelf
- Item 8: Nicholas E. Bush. Direct and Lateral Resistance of Power-Driven Nails and Staples in Clear Douglas-fir, 1971 Add to Shelf
- Box-Folder 1.5: John Boothe. The Effect of Fumigants at Three Temperatures on the Stiffness and Bending Strength of Douglas-fir Heartwood, 1976 Add to Shelf
- Box-Folder 1.6: Student Projects: C, 1970-1977 Add to Shelf
- Item 1: Christopher S. Carter. Determination of Moduli of Elasticity, Rupture, and Rigidity for Insulation Board, 1974 Add to Shelf
- Item 2: John R. Cheeseman. Effect of Glueline Thickness on Shear and Tensile Properties of a Wood Composite, 1975 Add to Shelf
- Item 3: Jon Chrysler. Is there a Difference in Bending Strength between Heartwood and Sapwood of Douglas-fir Veneer?, 1970 Add to Shelf
- Item 4: Michael W. Clausen, Effect of Specimen Depth on Modulus of Elasticity in Clear Douglas-fir, 1973 Add to Shelf
- Item 5: Robert J. Colella. Evaluation of the Slip Moduli of Three Plywood-To-Wall Stud Fastening Systems, 1973 Add to Shelf
- Item 6: Joseph Coussens, Effects of Grade and Thickness Variations in Douglas-Fir Plywood on Modulus of Rupture, Modulus of Elasticity and Shear Strength, 1976 Add to Shelf
- Item 7: Douglas L. Crandall. The Screw-Holding Strength of Particleboard, 1977 Add to Shelf
- Item 8: Gary A. Deeke. Accuracy of Euler's Formula in the Prediction of Critical Load on Axially-Loaded Slender Columns, 1970 Add to Shelf
- Box-Folder 1.7: Student Projects: D, 1970-1975 Add to Shelf
- Item 1: Greg Dickson. Specific Gravity, Percent Summerwood, and Ring Count, as Predictors of Modulus of Elasticity and Modulus of Rupture, 1974 Add to Shelf
- Item 2: Edward C. Dierling. The Effect of Fomes Pini on the Bending Strength and Stiffness of Clear Douglas-fir, 1970 Add to Shelf
- Item 3: Mark C Dohrmann. Predicting Residual Strength and Stiffness of a Large Glued-Laminated Beam from Small Specimens Sawn from the Beam, 1975 Add to Shelf
- Item 4: Michael B. Donivan. Strength of Furniture Joint vs. Furniture Joint Design, 1975 Add to Shelf
- Box-Folder 1.8: Student Projects: E-F, 1970-1977, undated Add to Shelf
- Item 1: Tom Eby. The Effect of Density, Thickness and Board Location on Bending Strength, Stiffness and Internal Bond Strength of Commercially Produced Particleboard, 1977 Add to Shelf
- Item 2: Jon E. Edens. The Effects of Nail Spacing, Nailing Angle, and Joints on Interlayer Slip, in Plywood Sheating—Two-By-Four Construction, 1975 Add to Shelf
- Item 3: Keith Ehrensing. The Effect of Screw Size on Direct Screw Withdrawal Strength of Particleboard, 1970 Add to Shelf
- Item 4: Bruce H. Erickson. Comparative Tests of Modulus of Elasticity and Modulus of Rupture Between Clear Wood Sapwood Produced Beyond an Occluded Knot and Clear Wood Sapwood Developed Between Nodes of a 27 Year Old Douglas-fir, 1970 Add to Shelf
- Item 5: Thomas C. Ewen. A Comparison of the Modulus of Rupture, Modulus of Elasticity, Plywood Glue Line Shear Strength, and Percent Wood Failure on One Half Inch 3-Ply, 4-Ply, and 5-Ply Plywoods, 1971 Add to Shelf
- Item 6: Virgilio A. Fernandez. Effect of Fire-Retardant Treatments on the Strength and Stiffness of Small Douglas-fir Beams, undated Add to Shelf
- Item 7: David F. Flaming. Effects of Specific Gravity, Depth of Penetration, and Grain Direction on the Direct Withdrawal Resistance of Nails, 1976 Add to Shelf
- Box-Folder 1.9: Student Projects: G, 1972-1979 Add to Shelf
- Item 1: Charles Geissel. Effect of Depth in Small Clear Beams on Modulus of Rupture, Modulus of Elasticity and Modulus of Rigidity, 1974 Add to Shelf
- Item 2: Mark A. Gillies. Work Done in FP 422 Mechanical Properties II, 1978 Add to Shelf
- Item 3: Dennis M. Golik. Dynamic Modulus of Elasticity Measured by Flexural Vibration as a Cantilever as a Predictor of Modulus of Rupture for Clear Western Hemlock, 1972 Add to Shelf
- Item 4: Stephen W. Griffith. Effect of Head Speed, Span, and Thickness on Strength and Stiffness of Hardboard, 1979 Add to Shelf
- Item 5: Mark Grube. The Comparison of the Strength Properties of Three Construction Panels, 1979 Add to Shelf
- Box-Folder 1.10: Student Projects: H, 1970-1979 Add to Shelf
- Item 1: David Haas. Effect of Use of Recycled Pulp on the Properties of Bleached Douglas-fir Kraft Paper, 1979 Add to Shelf
- Item 2: Kerry A. Hart. A Comparison of MOR and MOE of Dry Douglas-fir 2 x 4 Studs from Peeler Cores and Small Logs with Studs from the Outer Part of Larger Logs, undated Add to Shelf
- Note: Includes 2 color prints
- Item 3: John H. Hatton. Effect of Long Term Water Soak on Modulus of Rupture and Modulus of Elasticity in Particleboard Underlayment, 1970 Add to Shelf
- Item 4: Guy G. Helsing. The Effect of Three Fumigants on Stiffness and Strength of Douglas-fir Heartwood, 1973 Add to Shelf
- Item 5: Jim Herold. Direct Withdrawal Resistance of 1¼” Helically Grooved Nails Compared with 1¼” Flathead Screws in Douglas-Fir and White Oak, 1973 Add to Shelf
- Item 6: Mark Hollaender. Comparing Nails and Screws and Investigating the Effect of Load Levels and Load Cycling on Interlayer Slip, 1979 Add to Shelf
- Item 7: Robert K. Horton. The Effect of Beating and Sheet Weight on the Strength Properties of Kraft Paper, 1970 Add to Shelf
- Box-Folder 1.11: Jim Hallstrom. Development of a Non-Destructive Testing Method for Unseasoned Douglas-fir Scaffold Plank, 1973 Add to Shelf
- Box-Folder 1.12: Bill Huff. Modulus of Elasticity Measured by Static and Dynamic Methods as Non-destructive Predictors of Modulus of Rupture, 1976 Add to Shelf
- Box-Folder 1.13: Student Projects: I-J, 1971-1976 Add to Shelf
- Item 1: Bob Inwards. The Effect of Vapam (Sodium Methyl Dithiocarbamate) on the Stiffness and Bending Strength of Douglas-fir Heartwood, 1975 Add to Shelf
- Item 2: John A. Johnson. Effect of Machine Direction on Certain Properties of Particleboard Underlayment, 1976 Add to Shelf
- Item 3: David E. Jordan. The Effect of Load Application Direction with Respect to Grain Angle on the Shear Strength of Clear Douglas-fir, 1971 Add to Shelf
- Box-Folder 1.14: Gotzsche-Larsen Jens. Determination of Modulus of Rigidity and True Modulus of Elasticity for Three Sizes of Douglas-fir Beams, 1976 Add to Shelf
- Box-Folder 1.15: Gotzsche-Larsen Jens. Determination of Modulus of Rigidity and True Modulus of Elasticity for Three Sizes of Douglas-fir Beams, 1976 Add to Shelf
- Box-Folder 1.16: Student Projects: K, 1973-1978 Add to Shelf
- Item 1: Stephen S. Kelly. The Modulus of Elasticity of Particleboard as Effected by Small Span/Depth Ratios, 1977 Add to Shelf
- Item 2: Nancy Klink. The Effects of Thickness, Frequency, and Sound Pressure Level on the Sound Transmission Loss of Three Materials Commonly Used in Building Construction, 1978 Add to Shelf
- Item 3: Chuck L. Kroeger. Comparison of Utility-Grade Englemann Spruce Two-By-Four Stud Strength Ratios Determined by Three Different Methods, 1973 Add to Shelf
- Box-Folder 1.17: Student Projects: L, 1976-1977 Add to Shelf
- Item 1: David G. Langland. Effect of Beating Time, Basis Weight, and Test Span on Some Paper Properties, 1977 Add to Shelf
- Item 2: Daniel J. Lewis. The Mechanical Properties of Hardboard as Affected by Orzan, 1977 Add to Shelf
- Item 3: Gray S. Likins. Moduli of Elasticity Determined by Three Methods as a Predictor of Modulus of Rupture for Clear Douglas-fir Studs, 1977 Add to Shelf
- Item 4: Jim Lyman. Variation of Modu1us of Elasticity in ½" Plywood With Respect to Specimen Size, 1976 Add to Shelf
- Box-Folder 1.18: Student Projects: M, 1970-1978 Add to Shelf
- Item 1: Norman Marrs. Effect of Fiberglass Lamination on the Strength of Small Clear Wood Specimens, 1970 Add to Shelf
- Item 2: Edward J. McLaughlin Jr. Special Term Report on Activities in Mechanical Properties Tim Marcy, Moisture Content and How It Effects the Strength and Stiffness of Wood in Bending, 1974 Add to Shelf
- Note: Includes 4 b/w prints
- Item 3: Greg W. Miller. Strength and Stiffness of Composite I Beams with Structural Particleboard Webs and Solid Wood Flanges, 1975 Add to Shelf
- Item 4: Arjen A. Morks. Effects of Accelerated Aging Methods on the Properties of Plywood, 1978 Add to Shelf
- Item 5: Michael E. Murphy. The Effect of Preservative Treatments on the Withdrawal Resistance of Three Nail Types in Douglas-fir, 1978 Add to Shelf
- Box-Folder 1.19: Student Projects: N-O, 1970-1979 Add to Shelf
- Item 1: Scott Nebinger. Tension Strength and Stiffness of Nailed or Glued Truss Plate End-Joints, 1977 Add to Shelf
- Note: Includes 2 b/w prints
- Item 2: Bradley J. Nutting. Comparison of Bending Properties of Peeler Core-Cut and Log-Cut Studs, 1979 Add to Shelf
- Item 3: Jerry Obendorf. Creep and Recovery in Particleboard as Affected by Relative Humidity, 1970 Add to Shelf
- Note: Includes 5 b/w prints
- Item 4: Edward W. Olson. Effect of Redrying on the Bending Properties of Veneer, 1979 Add to Shelf
- Box-Folder 1.20: Student Projects: P, 1971-1979 Add to Shelf
- Item 1: Gregg T. Perry. Effect of Moisture Contents Below Fiber Saturation Point on Modulus of Rupture and Modulus of Elasticity in Two Specific Gravity Classes of Flat-Grain Western Hemlock, 1971 Add to Shelf
- Item 2: Larry Phillips. Accuracy of Eulers Formula in the Prediction of Critical Load on Axially Loaded Slender Columns, 1971 Add to Shelf
- Item 3: James L. Ployhar. The Effect of High Temperature on the Strength of Two Northwest Softwoods, 1979 Add to Shelf
- Item 4: Mark Powers. A Study of the Strength Properties of Hole-Incised Dimension Lumber, 1979 Add to Shelf
- Item 5: Jerry Premo. The Effect of Moisture Content on Direct Withdrawal of Common Wire Nails in Western Hemlock, 1971 Add to Shelf
- Box-Folder 1.21: Student Projects: R, 1970-1979 Add to Shelf
- Item 1: Rod L. Remington. The Effect of Finger Joints on the Tensile Strength of Douglas-fir 2” x 4”, 1970 Add to Shelf
- Item 2: Stephen Renn. The Effects of Nail Size, Plywood Thickness, and Edge Distance on Nail Strength and Joint Slip of Plywood-Solid Wood Joints, 1976 Add to Shelf
- Item 3: Johan Rering. Flexural Properties of a Particleboard Wood-Veneer Composite, 1977 Add to Shelf
- Box-Folder 1.22: Student Projects: S (Folder 1/2), 1970-1979 Add to Shelf
- Item 1: Eric R. Schild. The Strength of Nail, Screw, and Glue Joints Using Ponderosa Pine, Douglas-fir Plywood, and Particleboard, 1978 Add to Shelf
- Item 2: Glenn Schroeder. Relationships Between Specific Gravity, Hardness, Modulus of Elasticity, and Modulus of Rupture in Clear Douglas-fir, 1971 Add to Shelf
- Item 3: Randall Scott. Predicting Plywood Strength and Stiffness from Veneer Strength and Stiffness, 1970 Add to Shelf
- Item 4: Michael K. Seeds. A Comparison of Modulus of Rupture, Modulus of Elasticity, Shear Strength, and Percent Wood Failure of Three Different Types of One-Half Inch Exterior-Grade Douglas-fir Plywood, 1975 Add to Shelf
- Item 5: Thomas H. Sheffield. An Experiment to Examine the Effect of Freezing Temperatures on the Bending Properties of Solid Wood, 1979 Add to Shelf
- Item 6: Tom Shuford. Effect of Resin Impregnated Lead Holes on Direct Screw Withdrawal Resistance, 1970 Add to Shelf
- Note: Includes 3 b/w prints
- Box-Folder 1.23: Student Projects: S (Folder 2/2), 1971-1979 Add to Shelf
- Item 1: Michael A. Sigman. Particleboard Properties as a Function of Location Within a Hot Press, 1978 Add to Shelf
- Item 2: Ray Slaughter. Evaluating the Effect of Drying Temperature of Rotary-Cut Veneers on Modulus of Rupture and Modulus of Elasticity of 3/8" Douglas-Fir Plywood, 1971 Add to Shelf
- Item 3: Harry R. Sondag. A Comparison of Two Methods of Accelerated Aging of Particle Board by Means of Modulus of Rupture, 1971 Add to Shelf
- Item 4: Robert Neal Stephen. Comparison of Bending Strength, Stiffness and Internal Bond Strength for Two Types of Structural and One Industrial-Grade Particleboard, 1975 Add to Shelf
- Item 5: John W. Stermer. The Determination of True Modulus of Elasticity of Douglas-fir and Coast Hemlock 2x6's, 1979 Add to Shelf
- Box-Folder 1.24: Student Projects: Glenn Schroeder. Derivations Design, 1973 Add to Shelf
- Box-Folder 2.1: Student Projects: T, 1974-1976 Add to Shelf
- Item 1: George R. Tietze. Effect of Stress Level of the Creep of Three Types of Composite Boards, 1979 Add to Shelf
- Item 2: Larry C. Tinker. Prediction of Modulus of Rupture and Modulus of Elasticity of Small Clear Specimens from Properties of Increment Cores, 1974 Add to Shelf
- Item 3: Charles R. Turner. Correlation of Circular Saw Power Requirements with Wood Specific Gravity Variations and Saw Feed Rate, 1976 Add to Shelf
- Box-Folder 2.2: Student Projects: U-V, 1976, 1979 Add to Shelf
- Item 1: David Underriner. Specific Gravity, Ring Count, and Percent Summerwood as Indicators of Strength in Douglas-fir, 1979 Add to Shelf
- Item 2: James S. Vahrenwald. Analysis of Visual Strength Ratio, Actual Strength Ratio, Specific Gravity and Modulus of Elasticity as Predictors of Modulus of Rupture, 1976 Add to Shelf
- Box-Folder 2.3: Student Projects: W, 1971-1978 Add to Shelf
- Item 1: Cle Wade. The Effect of Starch and Refining Time on Tensile Stretch, Tensile Energy Absorption, Bursting Strength and MOE in Bending of Paper, 1975 Add to Shelf
- Item 2: Brian A. Wagner. Thickness, Density and Machine Direction and Their Effects on Bending Properties, 1977 Add to Shelf
- Item 3: Tim Wall. Effect of Span Width, and Method of Loading on Modulus of Elasticity of Plywood, 1973 Add to Shelf
- Item 4: Mark Watson. The Effect of Stress Level and Thickness Upon the Creep Properties of Particleboard From Two Different Sources, 1978 Add to Shelf
- Item 5: Andrew F. Winkle. The Effect of Incising on Modulus of Rupture and Modulus of Elasticity of Douglas-fir, 1971 Add to Shelf
- Item 6: Walter M. Wirfs. Effect of Impact on Modulus of Rupture and Modulus of Elasticity of Urea-formaldehyde Bonded Douglas-Fir Particle Board, 1973 Add to Shelf
- Series 2: Reference Materials, 1937-1976 Add to Shelf
- Contains correspondence, research data, reports, testing equipment manuals and related documentation pertaining to forest products. The bulk of the items in this series are related documentation and testing equipment manuals.
- Box-Folder 2.4: Bark, Volume, and Specific Gravities (Lodewick), 1957 Add to Shelf
- Note: Correspondence
- Box-Folder 2.5: Bark Specific Gravity and Moisture Content, 1951 Add to Shelf
- Note: Correspondence
- Box-Folder 2.6: Barometer, 1937-1959 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.7: Connectors, undated Add to Shelf
- Note: Research Data
- Box-Folder 2.8: Combustion of Wood, 1958-1962 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.9: Chips-Springfield Survey 20c, 1954 Add to Shelf
- Note: Report
- Box-Folder 2.10: CO2 vs. XSAIR and Stack Temp VSXS, 1956 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.11: Corrosion and Deterioration of Wood in Contact with Iron Plus Other Corrosion, 1962-1964 Add to Shelf
- Note: Research Data
- Box-Folder 2.12: Deflectometer – Test Mach. Specs., undated Add to Shelf
- Note: Related Documentation
- Box-Folder 2.13: DIAPH. Test Apparatus 45KI, Redesign of, 1960 Add to Shelf
- Note: Research Data
- Box-Folder 2.14: ERROTC in DEFL. RDGS when Using 8” x 6 ½” WF Beam in Test Machine and New 15” Deep I-Beam, 1966 Add to Shelf
- Note: Research Data
- Box-Folder 2.15: High-Temp. Veneer Drying Apparatus, 1966 Add to Shelf
- Note: Research Data
- Box-Folder 2.16: Floor Test Apparatus, 1963 Add to Shelf
- Note: Research Data
- Box-Folder 2.17: Shrinkage Measurement Apparatus, 1963 Add to Shelf
- Note: Research Data
- Box-Folder 2.18: Cap Test Mold, 1959 Add to Shelf
- Note: Research Data
- Box-Folder 2.19: Diaphragm Test Apparatus, 1960 Add to Shelf
- Note: Research Data
- Box-Folder 2.20: Heat Pump, 1948-1960 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.21: Ignition, Charring Temp., Wood, 1949-1967 Add to Shelf
- Note: Correspondence
- Box-Folder 2.23: Impregnator, 1952 Add to Shelf
- Note: Research Data
- Box-Folder 2.24: 5/4 and 4/4 Joists, 1962 Add to Shelf
- Note: Research Data
- Box-Folder 2.25: Log Scale vs. FT3, Vol. of Stumps, 1953 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.26: ALTEC – Microphone, 1954-1959 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.27: MOE Calc. From Slope – 60,000 Test Mach., undated Add to Shelf
- Note: Related Documentation
- Box-Folder 2.28: Reeves Drives, 1951 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.29: Roots Blower, 1948 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.30: Sanborn Recorder Schaevitz, Gages etc, 1963-1965 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.31: Sanborn Recorder Manual, 1962-1964 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.32: Shrinkage, Swelling, undated Add to Shelf
- Note: Related Documentation
- Box-Folder 2.33: Steel Strength Variation, 1954 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.34: Steel-Wood Joist-Stud, Cost Compare, 1972 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.35: Strain Gages, 1960-1961 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.36: Temp. Meas. Instr., 1949-1964 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.37: Test Grips (Two Different Sets), 1964-1965 Add to Shelf
- Note: Research Data
- Box-Folder 2.38: Temp. Recorder Specs, GE-Also Range Change Kit, 1959-1967 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.39: Thermal Expansion of Wood, 1960 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.40: Thermal Properties of Wood (List of Duplications) USFPL, 1961 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.41: Temperature Measurement, 1948-1951 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.42: Veneer – Heated, 1960 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.43: Vibration Insulators and Vibrators, 1954-1960 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.44: Floor Vibration Meas., 1969-1974 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.45: Weighing Devices, 1951-1952 Add to Shelf
- Note: Test Equipment Manual
- Box-Folder 2.46: Wood, Slabs, Cubic Vol. Rel., Also Bark on Slab, 1954 Add to Shelf
- Note: Related Documentation
- Box-Folder 2.47: INSTRON – Inst. Manuals, 1964-1971 Add to Shelf
- Note: Testing Equipment Manual
- Box-Folder 2.48: INSTRON – New Machines, 1976 Add to Shelf
- Note: Testing Equipment Manual